IZBORNIK HOME FORUM ACCESS EXCEL WORD  
 

HOME

   
1 UVOD
2 CMD sintaksa i XP naredbeni interpreter
3 Parametri i Prekidači
4 Kretanje pomoću tipki
5 Podešavanje prozora
6 Zamjenski znakovi
7 Editiranje TXTdatoteka
8 Posebni simboli u CMD naredbi
9 BATCH datoteke u CMD
10 HELP u CMD prozoru
11 ERROR u CMD prozoru
 

-- NAREDBE U  CMD-u --

  ASSOC
  AT
  ATTRIB
  BREAK
  CACLS
  CALL
  CD
  CHCP
  CHDIR
  CHKDSK
  CHKNTFS
  CLS
  CLIP
  CMD
  COLOR
  COMP
  COMPACT
  CONVERT
  COPY
  DATE
  DEL
  DIR
  DISKCOMP
  DISKCOPY
  DOSKEY
  ECHO
  ENDLOCAL
  ERASE
  EXIT
  FC
  FIND
  FINDSTR
  FOR
  FORMAT
  FTYPE
  GOTO
  GRAFTABL
  HELP
  IF
  LABEL
  MD
  MKDIR
  MODE
  MORE
  MOVE
  PATH
  PAUSE
  POPD
  PRINT
  PROMPT
  PUSHD
  RD
  RECOVER
  REM
  REN
  RENAME
  REPLACE
  RMDIR
  SET
  SETLOCAL
  SHIFT
  SORT
  START
  SUBST
  TIME
  TITLE
  TREE
  TYPE
  VER
  VERIFY
  VOL
  XCOPY
   
12 PING
13 IPCONFIG
14 NETSTAT
15 ROUTE
16 NSLOOKUP
17 ARP
18 TRACERT
19 TELNET
20 NET Commands
   
  .

NAREDBENO SUČELJE (Command Prompt line)

TRACERT

Search This Web Site

Adsense sponzor



 




Tracert je implementacija traceroot naredbe u Windows  OS-u.
Prikazuje rute do nekog odredišta. U principu prikazuje IP adrese rutera preko kojih prolazi do odredišta.

Determines the path taken to a destination by sending Internet Control Message Protocol (ICMP) Echo Request messages to the destination with incrementally increasing Time to Live (TTL) field values. The path displayed is the list of near-side router interfaces of the routers in the path between a source host and a destination. The near-side interface is the interface of the router that is closest to the sending host in the path. Used without parameters, tracert displays help.

Syntax

tracert [-d] [-h MaximumHops] [-j HostList] [-w Timeout] [TargetName]

Parameters

-d

Prevents tracert from attempting to resolve the IP addresses of intermediate routers to their names. This can speed up the display of tracert results.

-h MaximumHops

Specifies the maximum number of hops in the path to search for the target (destination). The default is 30 hops.

-j HostList

Specifies that Echo Request messages use the Loose Source Route option in the IP header with the set of intermediate destinations specified in HostList. With loose source routing, successive intermediate destinations can be separated by one or multiple routers. The maximum number of addresses or names in the host list is 9. The HostList is a series of IP addresses (in dotted decimal notation) separated by spaces.

-w Timeout

Specifies the amount of time in milliseconds to wait for the ICMP Time Exceeded or Echo Reply message corresponding to a given Echo Request message to be received. If not received within the time-out, an asterisk (*) is displayed. The default time-out is 4000 (4 seconds).

TargetName

Specifies the destination, identified either by IP address or host name.

-?

Displays help at the command prompt.

Remarks

  • This diagnostic tool determines the path taken to a destination by sending ICMP Echo Request messages with varying Time to Live (TTL) values to the destination. Each router along the path is required to decrement the TTL in an IP packet by at least 1 before forwarding it. Effectively, the TTL is a maximum link counter. When the TTL on a packet reaches 0, the router is expected to return an ICMP Time Exceeded message to the source computer. Tracert determines the path by sending the first Echo Request message with a TTL of 1 and incrementing the TTL by 1 on each subsequent transmission until the target responds or the maximum number of hops is reached. The maximum number of hops is 30 by default and can be specified using the -h parameter. The path is determined by examining the ICMP Time Exceeded messages returned by intermediate routers and the Echo Reply message returned by the destination. However, some routers do not return Time Exceeded messages for packets with expired TTL values and are invisible to the tracert command. In this case, a row of asterisks (*) is displayed for that hop.
  • To trace a path and provide network latency and packet loss for each router and link in the path, use the pathping command.
  • This command is available only if the Internet Protocol (TCP/IP) protocol is installed as a component in the properties of a network adapter in Network Connections.

Examples

To trace the path to the host named corp7.microsoft.com, type:

tracert corp7.microsoft.com

To trace the path to the host named corp7.microsoft.com and prevent the resolution of each IP address to its name, type:

tracert -d corp7.microsoft.com

To trace the path to the host named corp7.microsoft.com and use the loose source route 10.12.0.1-10.29.3.1-10.1.44.1, type:

tracert -j 10.12.0.1 10.29.3.1 10.1.44.1 corp7.microsoft.com

 

Primjer iz CMD prompta

Adsense sponzor



 Primjer iz web browsera

Adsense sponzor



 




Copyright 2009 - Ivan Cindrić - ic.ims.hr